Tips for Pressure Washing Your Home

Whether your home is older or just becoming dirty on the outside, there is no more convenient or cost-effective way to clean the siding of your home than a pressure washer. It can easily blast away mildew, dirt, and muck that would take hours to remove by hand. If you are new to the concept, here is what you should know:

Safety

When pressure washing your home, make sure your siding can handle it. Concrete, vinyl, brick, and stone are all capable of handling a strong pressure washer (even stucco with the proper procedure). If your house has been painted, be cognitive that no lead was used in the paint. This can release harmful vapor you can breathe. Inspect your home for any areas that will need special attention. Remember, do not pressure wash your windows; they will break! Also, you should wear a pair of safety gloves and safety goggles at all time. The high-pressure water is strong enough to literally cut you! It is important to be aware of its power at all times and remember to stay safe.

What Is a Pressure Washer?

Your typical garden hose has an average of 35 psi. PSI is a measurement of Pounds Per Square Inch. A pressure washer will hook up to your house and amplify that tremendously. Some pressure washer will range from 1500-3500 PSI, but you can find some in a wide variety of ranges. Pressure washers can come electric, cordless, or gas-powered. The stronger the PSI, the more heavy-duty grime you will be able to remove.

Setting up Your Pressure Washer

Attach your garden hose and turn on the water. Your pressure washer will have an inlet and an outlet hose. Then hook up your outlet house with your high-power hose. You can select different tips to place at the end of your hose. Most pressure washers will have a wand which can allow you to control turning on and off the sprayer easily. Find out which tip is best for your project. Some pressure washers can be powerful enough to tear right through your siding. Test a discrete area to see which tip is best for the job.

Stucco Specifics

Since we are in Arizona, stucco is the most popular siding option in our area. To make sure you properly use your power washer on your stucco siding, you will want to be cognitive of the following: 

  • First, you should look for chips or cracks in the stucco. You do this because water can come in through those areas. If there is a crack or chip, it will need to be filled before beginning. 
  • Next, you will want to spray the pressure washer in sections. Each section should be completely rinsed, have detergent applied, and completely rinsed again before moving onto your next section.
  • Additionally, while you apply the detergent, you should water the area to soak up some of the excess detergent on your stucco walls.
  • Lastly, you will want a 20-degree nozzle for a standard surface. With your intense stains, place a rotating scrub brush on the hose. 

Since stucco differs from other siding options, ask your pressure washer sales associates for a complete run-down before renting or even purchasing the pressure washer. This will ensure you fully understand its power and capabilities.

Pressure washing your home is an effective way to get rid of dirt and grime. Be very careful when using a high PSI pressure washer. Do not use this on windows or on your car because it can damage them. For more insight on exterior cleaning, make sure to subscribe.

Leave a Reply

Your email address will not be published.